High Acceleration
The brushless motor accelerates this car with with almost the double torque than the standard motors. And you can power up this car up to 15V, which is defenitely impossible with regular brushed motors...
Braking instead of reversing
Brushed driven cars need to reverse the motor in order to brake. That is of course a huge waste of energy and reduces the lifetime of the motor. A brushless motor is far more efficient, the ESC uses a minor current to block the motor. You even can adjust the braking response with our free and included.......
Program Card for Brushless Speed Controller
You get with this ready to run set a free programming card for the speed controller. Better yet you can also use the program card to use this ESC in an airplane or helicopter, just change the setup of it. It is so easy....
Reverse drive
Of course the electronic speed controller can reverse the motor - so you can drive backwards. You can program if it directly switches into the reverse mode or if it waits until the car comes to a standstill. You can even set up the Stop position of the radiocontrol, if you want to use another radio to dirve the 18T BL.
And not only that, but the electronic speed controller also realizes if the wheels are blocked and turn off the motor after some seconds instead of powering it up endlessly.
The Motor
itself is a 4500KV outrunner. This motors high torque results in tremendous accelerations. And the cooling of the motor is done by himself as you see the porpeller shaped inlet at the oppsite site of the gear. So the motor gets hardly more than hand warm even in competition usage.
Maintenance free
Yes, thats what brushless motors are. No more carbon or motor exchanges after a certain time of usage. No more headache about the fiddling when changing the carbons.
18T BRUSHLESS - What you get:
complete mounted ready to run 4WD 1:18 Truggy
4500KV brushless motor & 30A electronic speed controller for drive mode
NIMH battery 7.4V 1100mAh
27MHz Radio with D/R adj |
Home
